Products description

GRP pipe can be fabricated in various ways. The following is GGT standard for the fabrication of GRP pipes.
Filament wound method is generally used to produce GRP pipe.

Merit of GRP Pipe

The FRP is a widely proved composite material with high strength and corrosion resistance.
Corrosion Resistance
Both the inner and outer surfaces of the FRP pipe are corrosion resistant, eliminating the need for a lining process.
Strength to Weight Ratio
The specific strength of the FRP pipe exceeds that of steel and stainless steel
Light Weight
Fluidity in the FRP pipe is excellent because of small resistance and coefficient of friction (C=150), reducing the pumping cost. The inner surface is rarely worn by any possible sands or gravel.
Size Variety
The FRP pipe is available from 15 mm to 2.5 m in diameter. The standard lengths supplied are 6, 9, and 12m.
Low Thermal Conductivity
The FRP pipe has low thermal conductivity, saving the cost of heat insulation.
Low Thermal Expansion
The FRP pipe has low thermal expansion, lowering deformation and the number of expansion joints required.
FDA Compliance
The FRP is made of the certificated materials from FDA, so that the pipe can be used in applications for drinking water.


Applications

The FRP pipe requires no regular maintenance, allowwing any above ground, under ground, and subaqueous applications. Do you have to check and repair your steel pipes Just replace them with the FRP pipes, which is serviceable semi-permanently
Sea Water intake & Outfall Piping
Circulation piping for coling water
industrial alpplicated food Processing
Chemical transfer rocessing
Potable & Sanitary Piping
Chlorination piping
Sewage piping

Specification

No

Packing details

No